Evaluation of Diffuse Reflection Infrared Spectrometry for End-of-Shift Measurement of a-quartz in Coal Dust Samples.

Journal of occupational and environmental hygiene

PubMedID: 25636081

Miller AL, Murphy NC, Bayman SJ, Briggs ZP, Kilpatrick AD, Quinn CA, Wadas MR, Cauda EG, Griffiths PR. Evaluation of Diffuse Reflection Infrared Spectrometry for End-of-Shift Measurement of a-quartz in Coal Dust Samples. J Occup Environ Hyg. 2015;0.
ABSTRACT The inhalation of toxic substances is a major threat to the health of miners, and dust containing respirable crystalline silica (a-quartz) is of particular concern, due to the recent rise in cases of coal workers' pneumoconiosis and silicosis in some U.S. mining regions. Currently, there is no field-portable instrument that can measure airborne a-quartz and give miners timely feedback on their exposure. The U.S. National Institute for Occupational Safety and Health (NIOSH) is therefore conducting studies to investigate technologies capable of end-of-shift or real-time measurement of airborne quartz. The present study focuses on the potential application of Fourier transform infrared (FT-IR) spectrometry conducted in the diffuse reflection (DR) mode as a technique for measuring a-quartz in respirable mine dust. A DR accessory was used to analyze lab-generated respirable samples of Min-U-Sil 5 (which contains more than 90% a-quartz) and coal dust, at mass loadings in the ranges of 100-600 µg and 600-5300 µg respectively. The dust samples were deposited onto three different types of filters, borosilicate fiberglass, nylon and polyvinyl chloride (PVC). The reflectance, R, was calculated by the ratio of a blank filter and a filter with deposited mine dust. Results suggest that for coal and pure quartz dusts deposited on 37-mm PVC filters, measurements of log R correlate linearly with known amounts of quartz on filters, with R(2) values of approximately 0.99 and 0.94, respectively, for samples loaded up to ~4000 µg. Additional tests were conducted to measure quartz in coal dusts deposited onto the borosilicate fiberglass and nylon filter media used in the NIOSH-developed Personal Dust Monitor (PDM). The nylon filter was shown to be amenable to DR analysis, but quantification of quartz is more accurate when the filter is "free", as opposed to being mounted in the PDM filter holder. The borosilicate fiberglass filters were shown to produce excessive interference, making quartz quantification impossible. It was concluded that, while the DR/FT-IR method is potentially useful for on-filter measurement of quartz in dust samples, the use of PVC filters produced the most accurate results.